5 tips for your fireplace insert

If you consider purchasing and installing a fireplace insert, then this article is written just for you. With this contribution we want to provide practical tips for installation and operation of afireplace insert. The correct installation and correct operation of the fireplace are the basic requirements for your continued enjoyment of this investment.

Tip No. 1: Select the correct fireplace insert
When choosing a fireplace insert is not limited to design. Of course, you should make themselves aware, to look like the fireplace, if you prefer plain front glazing, sheet glass, two-sided glass fireplace or a review as a room divider. Consult in advance with your chimney sweep the condition of your chimney, the optimal nominal heat output and the fireplace flue pipe diameter and whether an external air supply is required. Only after you choose the fireplace insert.

Tip # 2: Select the right materials for the Mantel
Chimneys are suitable for various materials, which must always include the fire protection class A1 (non-combustible). If you want a fireplace cover, retains heat and radiates continuously, then choose the best materials such as fireclay, bricks, lava rock, marble, etc. For the construction of fireplaces can also heat insulation slabs made of calcium silicate (Silca, Promasil, …) use, they allow easy set up, but do not store heat. You can also combine these materials. Make use of special cements and mortars, which are intended for the construction of fireplaces.

Tip No. 3: fireplace insert installed properly
In the construction of the fireplace, you have to respect the manufacturer’s instructions and fire regulations. You can hang up your chimney, additional measures, please consult with him your plans in advance to avoid subsequent problems in the acceptance of the furnace.In our series of articles on the chimneys you will find helpful advice.

Note that when installing the fireplace insert minimum distances must be adhered to the cladding material in order to avoid overheating and damage of the fireplace insert and the chimney lining. The entire fireplace facade, adjoining the walls, ceilings, and are insulated from the ground. In addition to thermal insulation is combustible walls one brick lining made of aerated concrete is necessary. Combustible floors shall be recessed in the fireplace area. You can also weigh on the eighth floor load, because the fireplace with fireplace insert trim a few hundred pounds depending on model. For the weight distribution of a concrete slab is created on the mantelpiece is built.

Tip No. 4: Make a Probefeuerung before completion of the chimney lining
Go to the fireplace installation as follows: after creating the foundation element proceed with the installation and connection of the insert to the chimney. Then do one of the connected Probefeuerung fireplace insert. You check to see if the fireplace is working properly. Even at this moment the visit is advisable from your chimney, then he can check the correct connection of the insert easily and any changes are still easy to perform. After the completion of the chimney lining these changes only with great labor and expense are possible.

During this Probefeuerung also paint the chimney of the fireplace insert is completely burned out and cured, you should perform the Probefeuerung So a few hours with the manufacturer’s prescribed amount of fuel.

Tip No. 5: Preheat your fireplace insert correctly
For heating up, use thin wood shavings and thin pieces of wood. Do not use newspaper because it releases many harmful substances into the air. Alternatively, you can create a small stack of thin wood logs and put out a fire starter wood wool. The fire starter ignites then the underlying wood.

Make sure that during the heating phase günug fresh air is supplied into the combustion chamber. When heating the primary air should be completely opened, because an excess of oxygen is required. Once the wood is burning properly and created the first heat, you can reduce the primary air in order to regulate the burn. The Sekundärluftuzufuhr (airwash) should always be open to protect the glass from sooting.

Winter Final Action: Leading water fireplace inserts Aquaflam

At once, special price, you can now purchase a sophisticated hot water fireplace insert.

Aquaflam fireplace insert offers excellent value for money. It is a hot water fireplace insert with high water-side heat output and high efficiency.

Aquaflam’s performance in four variants – with 7, 12, 17 or 25 kW. Thus, each house can be heated optimally, regardless of whether it is a low-energy house or old.

Unique is on the hot water fireplace insert Aquaflam the combustion technology and the extensive equipment package.
Thanks to a three-stage combustion process, with primary, secondary and tertiary air supply achieved Aquaflam energy efficient and “clean” low-emission combustion. The three sides of the combustion chamber surrounding heat exchanger transfers the most heat energy to the water medium, which allows a high input into the central heating circuit.

Dual flush plate ensures clear view of the constantly flickering flames.

Integrated cooling coil protects the heat exchanger from overheating. So this is only in use in the latter case, the included electronic combustion control provides for the regulation of externalfresh air supply valve.

Are electronic combustion control for Aquaflam comes in two versions, standard and comfort. The standard variant observed the heat exchanger temperature and once it exceeds a preset limit, the fresh air supply restricted and thus reduces the heat output.

The top of the range of combustion control also allows the operator to set the desired temperature by a heat exchanger turning knob on the combustion chamber door frame.

Water connection for a user-friendly features of the fireplace insert to Aquaflam water connections on both sides of the heat exchanger. Thus, you can choose whether you connect the fireplace insert from the left or right.

Removable door frame facilitates installation of the fireplace insert.
Kamineinsaetze.eu provides the water fireplace inserts Aquaflam a complete accessories like memory buffer, mixing valve, stainless steel chimneys, flues, fireplace mesh, building materials etc.

Kitchen stove La Nordica Cucinotta

A wood stove in the kitchen is real pleasure for all, the stomach to cook at home. Woodstoves use the energy from wood and not only permit the preparation of food but also to heat the kitchen and associated facilities. There are also water-carrying cookers, which can even supply the whole house with hot water.

Particularly striking are the foci of the traditional Italian kitchen manufacturer La Nordica.With the kitchen stove Cucinotta La Nordica has created an elegant eye-catcher. LaNordica Cucinotta is characterized by a large combustion chamber with a particularlylarge pane of glass. The surface of enameled cast iron in black or cream combined with refined color door handles Cucinotta gives a special aura.

The kitchen stove can be used as a grill with an open operation. The barbecue grill is available as an optional accessory. The stove has a cast of multi-ring lid. The wooden trayis located below the combustion chamber and has a shapely handle as the firebox door.

La Nordica Cucinotta allows connection to an external air supply, the need for thisconnector can be ordered.

Anyone who wants an oven, open the kitchen stove La Nordica Cucinotta Forno its fullpotential.

Heating with a pellet stove is convenient, cheap and environmentally friendly, the pellets are small pellets made of quality wood with a calorific value of almost 90%. The filling of the integrated reservoir supplies the pellet stove for a long time, so that only a small amount of work required. The comfortable setting of the desired room temperature maintains a constant climate.

The company La Nordica Extraflame has specialized for 20 years of experience with electric heaters in the production of pellet stoves. Today, the Italian company Extraflame pellet stove one of the leading European manufacturers.

The range of Extraflame pellet is particularly diverse, meeting the highest standards and customer requirements. The pellet stove fascinate for its highly advanced combustion technology, high-profile Italian design and great benefits.

The product line includes Extraflame pellet with manual or electric operation. Even the connection to an existing heating system is not a problem, this provides extra Flame pellet stoves, which supply your radiators or underfloor heating water with comfortable and convenient.

Pellet La Nordica Extraflame show many features which are designed for long-term operation is very important. The control panel of the pellet stove allows adjustment of day and night temperature and the programing of up to 3 automatic ignition and shutdown for each day of the week. The small and handy remote control and GSM module for remote control adds to the comfort.

Extraflame Pelleöfen have a high quality heat exchangers made of stainless steel AISI 321 (18/10), which provides high thermal performance, durability and excellent heat conduction.

The Wartungsbedürftigten pellet stove parts can be handy, thanks go out with rail guidance system clean and simple.

Finally, secure the large pellet hopper and ash pan for a long autonomous operation.

Who convenient and highly efficient wood heater for his house searches finds in the pellet of Extraflame a true favorite, the links here, the economy and high comfort with stylish design and excellent quality.

For pellet stoves, a buffer memory is required?

Many pellet stove interested ask if is necessary for an exclusive space heating by a water-heating pellet stove installation of a buffer.

The answer is: yes and no.

Theoretically, direct heating from radiators through a water-heating pellet stove is possible because pellet stoves can be operated modulating. In other words, you can regulate in a pellet stove’s heat output according to heat demand.

In practice, however, such circuitry is not recommended. This would lead to frequent burner start and the pellet stove would often run into one of the efficiency of an unfavorableperformance range, which leads to increased pellet consumption and premature fouling of the lens.

The use of a buffer memory ensures even heat supply to the heating system. The pelletstove can be run at longer intervals in the most favorable operating performance range, which reduces wear and maintenance intervals and increase the life of your pellet stove.

The advantages of the circuit of a buffer with a pellet stove are clear, but how big shouldthe buffer be designed?

Buffer for pellet stoves properly dimensioned
The correct dimensioning of a buffer depends on several factors. In this article wedescribe the case when the pellet stove to be connected to the buffer memory alone,without consideration of other possibilities, such as a combination with solar or heat pump.

The design of a buffer for water heating pellet stove can be done using the followingformula:

Buffer storage volume = 35 liters of water per kilowatt-side pellet stove performance

Fast heat oven workshop with Eko vlna

Vlna Eko is specially designed for the rapid heating with convection heat, the same principle, we like it Bullerjan know of similar or convection oven. This workshop convinces by its simple tube furnace design and space-saving vertical format design.

The high combustion technology of the new furnace series keeps environmentally friendly and energy efficient wood burning. The Workshop stoves vlna Eko meets the stringent requirements of the Austrian Ordinance § 15a and the German BImSchV - Level 1 and DIN Plus.

This type of hot air oven produces the convection heat warms the surface of the pipe dueto the installation area very quickly. For this reason, the vlna wood stove is particularly well suited for apartments, weekend houses, garages and anywhere you have warm quicklyafter lighting want.

Vlna Eko has a primary, secondary and tertiary combustion, which ensures optimal burning wood. The Workshop stoves can be connected to an external air supply and thusoperate independently of ambient air.

The hot air furnace is manufactured in 3 power ratings, with 8.5 kW vlna II Eko, Eko vlna IIIwith 12.5 kW and 16.5 kW vlna Eko IV. The elegant design features in addition to stainless steel side plates, which make the stove very elegant.

Very good value for money and the extensive accessories make the vlna Eko wood stovefor both commercial and private use of very popular.

Fireplace insert – with or without external supply of fresh air?

For fuel burning in the fireplace oxygen is needed, the fire consumed for heating air. What is removed, it must also be fed back somewhere. It also applies in this case. To ensure proper operation of the fireplace while protecting the residents, must provide adequate ventilation.

The issue of fresh air is always current with chimneys. In the past, the natural leaks around windows and doors for the air supply to the installation of a chimney space were sufficient so that no special measures were necessary.
That has changed. Density design with modern low-energy buildings can be no accidental openings in the building envelope. The manufacturer of fireplace inserts and stoves have responded to this new challenge. Modern wood heaters can be connected to an external air duct to secure the necessary combustion air.
This air duct is supplied at the top by an air-exhaust-chimney. Air exhaust chimney is a specialchimney, which is next to the Flue outlet also has its own Lüftungszug available at the Zuluftrohrleitung is connected from the stove or fireplace insert. Specialized companies guarantee you a professional chimney.

Nowadays you can find in almost every chimney manufacturers a solution for room sealed wood combustion. Partly it is well-crafted systems, for example, allow a preheat the combustion air. This is important for effective combustion in the fireplace insert. The preheated combustion air mixes better with the wood gases that escape from wood combustion in the combustion chamber, and allowing her perfect burnout before escaping into the chimney. The result is a high efficiency of the fireplace insert and low emissions.

Another possibility is to supply the combustion air with an air duct from the basement or outside. But that is sometimes associated with more complex structural measures, and of course with the breaking of the thermal envelope of the house. The air must be the room that serves the fireplace with combustion air can be fed back somewhere. Furthermore, protection against pests are provided.

In deciding whether the fireplace can be operated in the given case, with or without external air supply, only the instructions of the competent chimney sweep are essential. So the question you should immediately move into the planning phase of the fireplace with house building and construction, or consult the project with the chimney sweep in advance.This is responsible for final inspection of the fireplace and the hearth operators can save a lot of subsequent actions.